Protect Penetrating Sealer protects surfaces against both oil and water-based staining and makes sealed areas easier and quicker to clean.
- Preserves the surfaces natural look.
- Suitable for internal & external use.
- Helps repel both oil and water-based stains.
- Does not contain dangerous or toxic solvents.
- Helps to prevent acid damage and efflorescence.
- Non yellowing and UV resistant.
- Water based sealer.
- Suitable for use on most porous surfaces including concrete, sandstone, granite, marble, slate, brick, and tiles.
Directions For Use:
Test in a small inconspicuous area to determine suitability for the intended use. Surface should be clean, dry, and free from any waxes, coatings, or finishes. Cover any painted or stained surfaces adjacent to application area.
Apply PROTECT to surface with brush, roller, or garden type sprayer. Remove any remaining sealer that has not penetrated the surface after 10 minutes. A minimum of two coats is recommended, although additional coats may be required on porous surfaces or heavy walkway areas to ensure sufficient protection. Allow 30 mins drying between coats (longer in humid or cold conditions).
It is highly recommended that the treated surface be kept clean and free of soil for at least 24 hours to allow optimal curing.
For cleaning external areas, use a garden hose with a pressure nozzle. High pressure cleaning is not.
recommended. For cleaning of internal areas, simply mop or wipe with a soft cloth and a mild detergent. Do not use harsh cleaning agents such as abrasive powders, ammonia, acids, solvents, or bleach.
PROTECT Penetrating Sealer will protect treated surfaces for many years. Under certain high wear conditions, such as heavy walkways, the surface should be tested periodically, and additional sealer applied if necessary.
1 Litre will cover approximately 20m2 per coat depending upon the material to be treated and method of application.